Skip to main content

Sponge Blasting Cleaning Technology - Things You Should Know Before Using It

Industries highly prefer sponge blasting cleaning technologies for removing any coating and even for profiling. It is a much safer practice than traditional dust removal procedures.


Like any other trending cleaning technology, this one also comes with its benefits, problems, solutions, and application knowledge. Before you use this technology of cleaning in your factories, you need to understand how it works and what clauses are attached.

What is sponge blasting, and how does it work?

Sponge abrasive blasting technology is a relatively new process of cleaning. It is a favourite alternative to hydro blasting, pneumatic blasting, or dry-ice blasting technologies. 

The process involves the mechanism of blasting synthetic sponge material, embedded within micro-abrasive fragments. It is a safe cleaning technology that assures you of little rebounding or dust formation.

Unlike hydro blasting technologies, this is a drier option for cleaning purposes. Even the pressure of blasting is relatively low, around 70-100 PSI.

Types of abrasive used:

  • There are more than 20 options for micro-abrasives that is suitable for the cleaning purpose.
  • The profile requires abrasive of 0-150-micron dimensions.
Benefits of using Sponge Blasting:

The method of blasting sponges for cleaning has several advantages. They are-

  • The technique is completely dry
  • Reduces the level of dust by 98% as in comparison with other abrasives
  • Help with profiling up to 125 microns
  • A safe method to blast near electrical lines
  • There is no risk of effluent and chemical generation
  • Reduces downtime for future maintenance

Where can you apply sponge blasting?

The method is safe to apply in areas like-

  • Cleaning machinery, walls, refurbishing parts, etc
  • Maintaining industrial coating and its removal
  • Decontamination from the generation of nuclear power

Conclusion:

Sponge explosion is a new technique for cleaning in the industry; it is useful in every possible way. If you want something unique and cost-saving, you must try this method once.

Comments

Popular posts from this blog

Introduction to Boilers Tube and Cleaning Procedure

Boiler tube is a very vital tube mainly used in industries. It is a tube which is attached with the boilers for the passage of the hot gas from a sealed container. Mostly the primary material of the tube is metal which is placed inside the boilers. Not only hot gases but sometimes this is also used for passed hot steam from water boilers. The boiler tube, hence, is always susceptible to different damages.  Hence boiler tube cleaning is essential. Some of them are as follows: Boiler feed water corrosion Graphitization Thermal fatigue Corrosion fatigue These kinds of damages can be overcome by cleaning of the boiler by the professionals. Why is professional need essential for cleaning? Boiler tube cleaning has to be done by the professionals because they can ensure that no internal parts are being damaged during the cleaning process. Professionals can make use of various latest technologies that would make the task easier. Moreover, they are efficie...

Why Do You Need Proper Cleaning Of Heat Exchanger?

Heat exchanger is a very important part of your industry which can help in controlling the air pollution. But when it gets infested with pollutants and is not being cleaned properly, it can be a sole reason to cause air pollution.   So you must take care of your heat exchanger and it can bring in a huge difference in the machineries that they are installed in. There is much such equipment where heat exchangers are compulsorily fitted and hence it should be taken proper care too. Focus on fouling Fouling is one of the main problems of the heat exchangers. There are many processes which cause the heat exchangers to foul or even scales over a long time. The excessive fouling can easily cause issues corrosion, particulate deposition, different reactions of chemicals and even rust.   Thus with all this you can eventually lost the reliability of the equipment, thus cutting down the running life of it. Hence it is very important you should do the heat exchanger cleanin...

The Best Way For Narrow Trench Digging With Minimal Debris And Labor

Have you heard about the non-destructive digging method? This is one of the effective methods of digging which is quite fast and cost-effective. This method is also termed as the vacuum excavation . It makes use of a suction machine which is being functioned under high-pressure air or water. Sucker trucks are the most popular and advanced machine which is being used for the excavation method. Benefits of the vacuum excavation Now let’s check why vacuum excavation is much preferred one than others: ·          They are safe for workers and bring no unnecessary injuries to the workers. ·          The method loosens the soil particles and removes them. Thus no damage or loss is brought to any properties. ·          This method can be done at any unreachable place too. ·          Affordable and is the m...