Skip to main content

Hydroblasting- The Technology Used For Industrial Surface Cleaning


What do you understand by hydroblasting?

Hydroblasting is the technological solution used for cleaning different surfaces on industrial level, with the help of energy under high water pressure, such that the jet cleans surface smoothly. This is a technology that doesn’t require use off any kind of abrasive while cleaning.

How does hydroblasting procedure works?

Hydroblasting requires the use of specialized equipment which intensifies the pressure of the water with help of pumps. This technology has proved to be useful for cleaning of heavy metal items used in industries, where the deposits are hard and difficult to remove with regular wash. The high-pressure water removes any kind of hard chemical deposit and grime particles present on a surface. In general, these water blasting technologies is used for cleaning in plants and petrochemical industries.

The process of hydroblast cleaning:
When you use improvised machinery for hydro-wash blasting purpose, the equipment releases jet water under high pressure. This removes any kind of unwanted fouling deposits on the surface of the plants and boilers to improve their work efficiency. The main concern while the cleaning is on is the safety of the workers and the machineries. When you use advanced technology and experienced workers to do the blasting, the work is taken forward in a safe environment.
Hydro Blast Cleaning – U.S. Coatings

Hydroblasting techniques:

When you say hydro blast, the process doesn’t mean cleaning with water under pressure alone. There are several other techniques that are associated with this. The modern techniques and procedures can be briefed as below –
1.     Automated hydro-blasting: This is a safer hands-free mode of jet water cleaning. This includes the use proficient software along with the technology.
2.     Increased volume hydro-blasting with big pumps: This calls for hydro cleaning with the use of huge pumps that work on high energy and is mostly automated in nature.
3.     Cutting with hydro-blasting under high pressure: When you use up a water pressure of about 40,000 psi for an effective cleaning the procedure is known as ultra-high-pressure hydro-blasting. This method is not only used for cleaning industrially but also for application cutting.

Benefits of using hydro-blasting:

Hydro-blasting, when used in industries have shown several beneficial traits that can be described in brief as below –
1.     This is an efficient way to cleaning big and heavy metallic items in industries and plants.
2.     This is a cold alternative for cutting certain appliances when used under ultra-high pressure.
3.     The process of hydro-blasting is very safe and under proper supervision this can happen very fast in a secured manner. This provides industrial safety of all workers around the cleaning process.
4.     Cleans very efficiently and increases the working capacity of machineries.
5.     Usage of hydro-blasting has proficiently reduced the down time of work to a considerable extent.
6.     There are no chances of having any kind of fire related damage when you use water.
7.     Hydro-blast cleaning is ideal for any inflammable environment like that in petrochemical industries where you can’t use a torch for cleaning purpose.

Comments

Popular posts from this blog

The Best Way For Narrow Trench Digging With Minimal Debris And Labor

Have you heard about the non-destructive digging method? This is one of the effective methods of digging which is quite fast and cost-effective. This method is also termed as the vacuum excavation . It makes use of a suction machine which is being functioned under high-pressure air or water. Sucker trucks are the most popular and advanced machine which is being used for the excavation method. Benefits of the vacuum excavation Now let’s check why vacuum excavation is much preferred one than others: ·          They are safe for workers and bring no unnecessary injuries to the workers. ·          The method loosens the soil particles and removes them. Thus no damage or loss is brought to any properties. ·          This method can be done at any unreachable place too. ·          Affordable and is the m...

Introduction to Boilers Tube and Cleaning Procedure

Boiler tube is a very vital tube mainly used in industries. It is a tube which is attached with the boilers for the passage of the hot gas from a sealed container. Mostly the primary material of the tube is metal which is placed inside the boilers. Not only hot gases but sometimes this is also used for passed hot steam from water boilers. The boiler tube, hence, is always susceptible to different damages.  Hence boiler tube cleaning is essential. Some of them are as follows: Boiler feed water corrosion Graphitization Thermal fatigue Corrosion fatigue These kinds of damages can be overcome by cleaning of the boiler by the professionals. Why is professional need essential for cleaning? Boiler tube cleaning has to be done by the professionals because they can ensure that no internal parts are being damaged during the cleaning process. Professionals can make use of various latest technologies that would make the task easier. Moreover, they are efficie...

Why Do You Need Proper Cleaning Of Heat Exchanger?

Heat exchanger is a very important part of your industry which can help in controlling the air pollution. But when it gets infested with pollutants and is not being cleaned properly, it can be a sole reason to cause air pollution.   So you must take care of your heat exchanger and it can bring in a huge difference in the machineries that they are installed in. There is much such equipment where heat exchangers are compulsorily fitted and hence it should be taken proper care too. Focus on fouling Fouling is one of the main problems of the heat exchangers. There are many processes which cause the heat exchangers to foul or even scales over a long time. The excessive fouling can easily cause issues corrosion, particulate deposition, different reactions of chemicals and even rust.   Thus with all this you can eventually lost the reliability of the equipment, thus cutting down the running life of it. Hence it is very important you should do the heat exchanger cleanin...